How To Replace Kirkland Stainless Steel Looped Tube Burner?

Content Menu

● Understanding the Components

● Tools and Materials Needed

● Step-by-Step Guide to Replacing the Burner

>> Step 1: Safety First

>> Step 2: Remove Grill Components

>> Step 3: Detach Old Burner

>> Step 4: Install New Burner

>> Step 5: Reassemble Grill Components

>> Step 6: Test Your Grill

● Conclusion

● FAQ

>> 1. How often should I replace my grill burners?

>> 2. Can I clean my burners instead of replacing them?

>> 3. What type of replacement burner should I buy?

>> 4. Is it safe to use my grill if one burner is malfunctioning?

>> 5. Where can I buy replacement parts for my Kirkland grill?

● Citations:

Replacing the burner in your Kirkland gas grill can seem daunting, but with the right tools and guidance, it can be a straightforward task. This article will guide you through the entire process of replacing the stainless steel looped tube burner, ensuring your grill is back in action for your next barbecue.

Understanding the Components

Before diving into the replacement process, it's essential to understand the components involved:

- Burner Tubes: These are responsible for distributing gas evenly to create a flame.

- Igniter: This component ignites the gas when you turn on your grill.

- Flavorizer Bars: These bars help vaporize drippings and add flavor to your food while protecting the burners.

Tools and Materials Needed

To replace your Kirkland burner, gather the following tools and materials:

- Replacement stainless steel looped tube burner

- Screwdriver (flathead and Phillips)

- Pliers

- Adjustable wrench

- Safety gloves

- Work surface or cloth to place removed parts on

Step-by-Step Guide to Replacing the Burner

Step 1: Safety First

Before starting any repair work, ensure that your grill is turned off and disconnected from the propane tank. This step is crucial for your safety.

Step 2: Remove Grill Components

1. Take Off the Grates: Remove the cooking grates from your grill. This will give you access to the burner assembly.

2. Remove Flavorizer Bars: Next, take out any flavorizer bars that may be covering the burners.

3. Accessing Burners: You should now see the burner tubes. They are typically held in place by cotter pins or brackets.

Step 3: Detach Old Burner

1. Remove Cotter Pins: Use pliers to pull out the cotter pins holding the burner in place.

2. Disconnect Igniter Wires: If your burner has an igniter, carefully disconnect any wires attached to it.

3. Lift Out Old Burner: Once everything is detached, gently lift out the old burner tube.

Step 4: Install New Burner

1. Position New Burner: Place the new stainless steel looped tube burner in position where the old one was removed.

2. Reconnect Igniter Wires: If applicable, connect the igniter wires back to the new burner.

3. Secure with Cotter Pins: Insert cotter pins or secure brackets to hold the new burner in place.

4. Check Alignment: Ensure that everything is aligned correctly before proceeding.

Step 5: Reassemble Grill Components

1. Replace Flavorizer Bars: Put back any flavorizer bars you removed earlier.

2. Reinsert Cooking Grates: Finally, place your cooking grates back into position.

Step 6: Test Your Grill

1. Reconnect Propane Tank: Once everything is reassembled, reconnect your propane tank.

2. Check for Leaks: Before lighting, check all connections for leaks using a soapy water solution.

3. Ignite Your Grill: Turn on your grill and ignite it according to its manual instructions.

Conclusion

Replacing a Kirkland stainless steel looped tube burner is a manageable task that can extend the life of your grill significantly. By following these steps carefully, you can ensure a safe and effective replacement process, allowing you to enjoy delicious grilled meals once again.

FAQ

1. How often should I replace my grill burners?

Burners should typically be replaced every 3-5 years or when they show signs of rust or uneven heating.

2. Can I clean my burners instead of replacing them?

Yes, if they are not severely corroded, cleaning with a wire brush can extend their life.

3. What type of replacement burner should I buy?

Ensure you purchase a replacement that matches your grill model; for Kirkland grills, use stainless steel looped tube burners for durability.

4. Is it safe to use my grill if one burner is malfunctioning?

It's best not to use a grill with a malfunctioning burner as it can lead to uneven cooking or safety hazards.

5. Where can I buy replacement parts for my Kirkland grill?

Replacement parts can be found at local hardware stores or online retailers specializing in grill components.

Citations:

[1] https://www.instructables.com/How-to-Make-a-BBQ-Burner/

[2] https://www.youtube.com/watch?v=asDFR66-Bi0

[3] https://www.appliancefactoryparts.com/content/pdfs/211884-1.pdf

[4] https://www.clagrills.com/allgrillparts/kirkland_signature/kirkland_signature-all-burners.htm

[5] https://www.grillparts.com/kirkland/default.aspx?productid=ngb1

[6] https://www.grillspot.com/kirkland-stainless-steel-burner-tube-10361

[7] https://tvwbb.com/threads/when-do-you-replace-burner-tubes.78828/

[8] https://www.youtube.com/watch?v=4BnWNWf6WeI

[9] https://www.youtube.com/watch?v=1Pdy0tLzM4Q

[10] https://www.grillparts.com/kirkland/default.aspx?productid=cit-ss